What are the best solar panels to use in winter

 There is a lot of research on how to install solar panels and an explanation of the electrical circuit that makes up the solar energy system. The installation of a solar energy system to provide a home with electricity is subject to some standards that must be respected by the person who installs solar panels, so it is recommended to install it by a professional and experienced person, but in this topic we will explain the most important stages of installing these panels and the steps that must be taken when installing.

How to install solar energy at home

• When installing solar panels, we must make sure of the place where we will install these panels, as it must be able to carry these panels, and that this place is exposed to direct and free sunlight. We must make sure that there is no obstacle to the sun's rays, such as no shade reaching the place where the solar panels are located.
• Any tilt in the installation area of ​​solar panels must be corrected by specialists to ensure that these panels are installed at the same tilt angle.
• Manufacture of an iron structure to put solar panels on, and it must be able to bear the weight of the panels.
• Put solar panels on the structure.
• Connecting and connecting the solar panels with each other through electrical wires to get in the end only two wires, a positive wire in red and a negative wire in blue.
• Connecting the wires of the solar panels to the electrical circuit of the house to be supplied with electricity, and this circuit consists of a voltage regulator that outputs 12 volts and a battery or several batteries in the event that we have several solar panels with a good amp, also the inverter converts us 12 volts DC voltage to 220 volts AC power for home appliances.

What is solar energy

Solar energy is the energy that is produced through sunlight, and this energy can be used as electrical energy or thermal energy, and when we use this energy, we do not use any source of energy from the earth such as petroleum, coal or otherwise, so solar energy is called renewable energy and It is clean energy that does not lead to any pollution on the earth, and this is one of the most prominent advantages of solar energy, which is why interested in it is increasing to develop it to be a major source of electricity as well as wind energy.

Read more How to preserve the life of batteries in solar energy

How to connect solar energy

There are several methods used by engineers and technicians to deliver solar energy, the most important of which are the following:

Connect the panels in series:

• This method depends on connecting the positive terminal number one of the solar panel with the other negative terminal number two, and in the same way with the rest of the panels.
• Finally, connect the two ends of the panel assembly that is connected in series through a load or charging regulator.

Connecting the panels in parallel:

• Solar panels with numbers one and two positive ones are connected with the negative ones.
• After you have connected all the panels in the group, connect the panels in parallel through the load regulator or charging.

At the end of this article, we have learned about the method of connecting solar panels in general, as well as the method of connecting them in series and parallel, and what is solar energy